Welcome to Tea with DidiDec 19, 2018
Auto brake rotor emark standard for trium
Centering Diameter：61 mm
Pitch Circle Diameter：100 mm
Brake Disc Thickness：11 mm
Minimum Thickness：9 mm
Number Of Holes：4
Solid Or Vented：S
If the drum not design properly,it will change it’s performance after heating.It will also emerge mechanical deformation if forced with un-even press ,to make the shoe and drum will not connect properly , the pedal effort and braking distance will increased also.When the un- roundness of the working surface is too big,it will lead to self-locking,vibrates,and noise. The the brake drum must has enough side thickness,and it also need cast out rib reinforcement on the surface at the mouth to improve the strength.And these ribs will also help for heat radiation. To reduce the friction surface temperature,shorten the cooling time of brake devices.improve the energy capacity 35%-40%.
After the brake drum working surface fixing with the drum.it will finish machining positioning with the bearing holes.The tolerance of the roundness and concentricity of the working surface of mini. Cars should be ≤0.03mm,the radial runout should be ≤0.05mm,stand unbalance ≤1.5N·cm.
If you’re interested in the racing coated brake disc rotor, welcome to buy the quality product with our factory. As one of the leading China manufacturers and suppliers in this field, we also offer the wholesale service with competitive price.China Customzed disc